Close-up of timber grain in warm honey and dark brown, growth rings running the length of the board

Heritage Jarrah

Heritage Jarrah — Australian Timber Naturals
Engineered Timber

Heritage Jarrah

from the Australian Timber Naturals

Real Jarrah veneer — deep red-brown, unmistakable.

ABOUT HERITAGE JARRAH

Heritage Jarrah is the deep red floor that no other timber convincingly imitates. Western Australian Jarrah runs from rich russet through to a dark, almost purple-brown, and it holds that colour with a saturation that stains and decors consistently fail to reproduce.

It is a floor with strong period associations. Jarrah was laid extensively in Australian homes through the first half of the twentieth century, and a Jarrah floor in a Californian bungalow or an Edwardian weatherboard reads as historically correct in a way a modern oak simply does not. If you are restoring a period house and the original boards are beyond saving, this is the veneer that continues the story.

The timber is dense and hard, and the deep colour is very good at concealing wear. What it does show is dust and pet hair, as any dark floor does, and it will read heavier in a small room than a pale board would.

Jarrah's colour deepens and enriches with UV exposure over the first year or two rather than fading, so expect the floor to settle into itself. Where a rug sits over it for a long period, the covered timber will lighten relative to the exposed area — moving rugs occasionally during the first year evens that out.

FULL SPECIFICATION

ColourHeritage Jarrah
RangeAustralian Timber Naturals
Type Engineered timber
Core 8-layer multi-ply
Thickness 14mm
Veneer 3mm Australian hardwood (re-sandable)
Length 1900mm
Widths 136mm and 190mm
Install Drop-lock click
Acoustic rating 5-star
Underfloor heating Suitable
Emissions Formaldehyde-free, VOC-free
Certification FSC-certified sustainable timber
Finish Confirm on enquiry
Profile Confirm on enquiry
Slip rating Confirm on enquiry
Janka Confirm on enquiry
Grade Confirm on enquiry
Box size Confirm on enquiry
Warranty Confirm on enquiry

Specifications indicative — confirm exact figures on enquiry. Fields still being confirmed with the manufacturer are marked above.

Full specifications available on request.

ADDITIONAL INFORMATION

Install methodDrop-lock click profile. Both widths use the same locking system. Confirm the intended width at quoting stage — box coverage differs between the 136mm and 190mm formats.
Subfloor preparationClean, structurally sound and dry, flat to within 3mm over a 2m straightedge. Australian hardwood veneers are unforgiving of an uneven substrate.
AcclimatisationAcclimatise on site for at least 48 hours before installation, boxes stacked flat with the ends opened. Dense native species benefit from the longer end of that window.
Wet-area suitabilityNot suitable for bathrooms, laundries or permanently wet areas. Real timber veneer — treat it as timber.
Underfloor heatingSuitable for underfloor heating. Follow the heating system manufacturer’s maximum surface temperature and commissioning schedule.

THE TIMBER BEHIND IT

Heritage Jarrah is a real Jarrah floor. If you want to know how Jarrah behaves underfoot on the Peninsula — how it sands, what coatings suit it, how it handles coastal humidity — read our Jarrah species guide.

Heritage Jarrah from the Australian Timber Naturals — supplied and installed across the Peninsula. Request a quote or a sample.