Flooring Store in Frankston Timber, Engineered & Hybrid

What flooring is best for a Frankston home?

It depends on what is under the existing floor and how the room is used. A great many Frankston houses are 1950s to 1970s stock on bearers and joists, with Baltic Pine or narrow hardwood strip underneath. Where that subfloor is dry and well ventilated, engineered timber is usually the best answer: real timber underfoot, on a cross-laminated core that will not cup and gap through a wet winter. Where the subfloor is damp, the clearance is low, or the floor runs continuously into a laundry or bathroom, hybrid is the more sensible choice because it is genuinely waterproof. We check before recommending rather than after.

Do you supply and install, or supply only?

Both, though supply and install is what we do most and what we quote by default. The advantage of a single quote covering material and labour is that nobody can blame anybody else if something goes wrong — the people who specify the floor are the people who lay it. We are happy to supply material only if you have your own installer, but the manufacturer warranties on these ranges assume the boards go down correctly, so it is worth asking us about subfloor preparation and acclimatisation even if we are not laying the floor ourselves.

How much does flooring cost in Frankston?

We quote per project rather than publishing a square-metre rate, because a rate that means anything has to account for the specific job. What moves the number is the range you choose, the total area, how many rooms and doorways the floor has to negotiate, the condition and flatness of the subfloor, whether existing carpet or tiles need lifting and disposing of, whether skirtings come off or scotia goes on, and how the new floor meets thresholds and stairs. A free measure and quote costs you nothing and produces a figure you can actually rely on.

What's the difference between engineered timber and hybrid?

Engineered timber is real timber. A 2mm or 3mm sliced hardwood veneer sits over a multi-ply core, so the surface is genuine oak or Australian hardwood with real grain, and a 3mm veneer can be sanded back and recoated later in the floor’s life. Hybrid has no timber in it at all: the core is stone plastic composite and the surface is a high-definition printed decor under a wear layer. Timber has depth a print cannot match. Hybrid is completely waterproof, harder to damage and quicker to lay. In the rooms where timber genuinely should not go, hybrid is the better floor.

Do you offer a free measure and quote?

Yes, across Frankston and the Mornington Peninsula, with no obligation and no charge. We come to the house, measure the rooms properly rather than estimating from a plan, look at the subfloor, check moisture where the construction warrants it, and talk through which ranges suit the way you actually live in the house. You get a written quote covering material, preparation, installation, trims and rubbish removal, so there are no line items appearing later that were assumed rather than stated.

What areas of the Mornington Peninsula do you service?

Frankston through to Portsea, and across to the Western Port side. That covers the Frankston LGA — Frankston North and South, Karingal, Seaford, Langwarrin, Carrum Downs and Skye — the bayside run through Mount Eliza, Mornington, Mount Martha, Dromana, Rosebud, Rye, Blairgowrie, Sorrento and Portsea, the hinterland around Red Hill, Main Ridge, Merricks and Moorooduc, and the Western Port towns of Hastings, Bittern, Crib Point, Somers and Balnarring. Every suburb has its own page with local detail; the full index is above.

How long does flooring installation take?

For a typical Frankston house of 70 to 100 square metres, allow two to three days on site once the boards have acclimatised. Acclimatisation itself takes at least 48 hours before that: the boxes sit flat in the rooms where the floor will be laid, with the ends opened, so the material settles to the humidity of your house rather than the warehouse. Add time for lifting old floor coverings, for any levelling the subfloor needs, and for larger or more complex layouts with split levels and stairs. We give you a schedule with the quote, not on the day.

Is hybrid flooring suitable for wet areas?

Yes. That is the main reason to choose it. The stone plastic composite core contains no organic fibre for water to swell or delaminate, so it is genuinely waterproof rather than merely water-resistant, and it holds its dimensions in a bathroom or laundry. Our hybrid ranges are rated for use throughout the house, wet areas included. Engineered timber is not: it is fine in a kitchen or entry where spills are wiped up promptly, but it should not go into a bathroom or laundry. Where a floor has to run continuously from living areas through to a wet area, hybrid is the range to look at.