Close-up of timber grain in warm honey and dark brown, growth rings running the length of the board

Charcoal Shale

Charcoal Shale — Highland Hybrid Collection
Hybrid

Charcoal Shale

from the Highland Hybrid Collection

Deep charcoal-grey decor, dark and contemporary.

ABOUT CHARCOAL SHALE

Charcoal Shale is the darkest board in this range — a deep charcoal grey with only a trace of brown, closer to slate or weathered shale than to any timber colour.

It is a strong contemporary choice and it does something specific in a room: it grounds it. A dark floor gives a space with white walls and high ceilings a base heavy enough to anchor the whole composition, and it makes an open-plan area feel more settled and enclosed.

It works particularly well with black window frames, matte black hardware and pale walls, where the floor and the joinery read as a deliberate pairing rather than an accident. Against warm timber furniture it provides contrast that lifts the timber.

The honest warning with any dark floor is maintenance, and this is the darkest we carry. Dust, pet hair and footprints all show readily, and there is no colour variation for them to hide in. The matte lacquer helps — there is no gloss to throw highlights across the surface — but this floor will want attention more often than a mid-tone. It is a poor choice for a busy family entry and a good one for a bedroom, a study or a low-traffic living area.

No species cross-link applies. This is a mineral-toned decor with no timber species behind it.

FULL SPECIFICATION

ColourCharcoal Shale
RangeHighland Hybrid Collection
Type Hybrid
Core Rigid limestone composite
Dimensions 1520 × 180 × 6mm
Wear layer 0.5mm
Surface Embossed woodgrain
Finish Lacquer matte
Profile Micro-bevel edge
Install Angle-to-angle locking, floating
Water resistance 100% waterproof
Underlay 1mm IXPE
Acoustic rating 5-star
Slip rating Confirm on enquiry
Commercial rating Confirm on enquiry
Box size Confirm on enquiry
Warranty Confirm on enquiry

Specifications indicative — confirm exact figures on enquiry. Fields still being confirmed with the manufacturer are marked above.

Full specifications available on request.

ADDITIONAL INFORMATION

Install methodFloating only, angle-to-angle click profile. No adhesive. Expansion gaps required at every perimeter and around fixed vertical elements.
Subfloor preparationClean, dry and flat. At 6mm this is a slim board and it telegraphs subfloor imperfection more than a thicker one — level properly before laying.
AcclimatisationAcclimatise on site for 24-48 hours in the room of installation, boxes laid flat.
Wet-area suitabilitySuitable throughout, including kitchens, bathrooms and laundries. The limestone composite core is 100% waterproof.
Underfloor heatingUnderfloor heating compatibility is not published for this range — confirm on enquiry before specifying over a heated substrate.

Charcoal Shale from the Highland Hybrid Collection — supplied and installed across the Peninsula. Request a quote or a sample.