Scenic Oak
Scenic Oak
from the Highland Hybrid Collection
Neutral mid-brown oak-look decor, the safe default.
ABOUT SCENIC OAK
Scenic Oak is the default board in this range and the one specified most often for rentals and investment properties. It is a neutral mid-brown oak-look decor — no strong warmth, no cool grey correction — reproducing the contemporary oak floor that has become the standard expectation in Australian interiors.
Neutrality is exactly what a rental floor needs. It will not clash with whatever wall colour, benchtop or joinery is already in the property, and it will not clash with whatever replaces them later. For a landlord or an agent, a floor that never becomes the reason a property shows badly is worth more than a floor with character.
Mid-tones are also the most practical to maintain. Dust does not show the way it does on a dark floor, and dark grit does not show the way it does on a pale one. Between tenancies that means less work to make the floor present well.
The embossed woodgrain and micro-bevel give the planks definition so the floor reads as boards rather than as a continuous sheet, and the matte lacquer avoids the plastic sheen that dates a cheap floor quickly.
No species cross-link applies to this colour. It is a generic oak-look print rather than a reproduction of a specific timber, and pointing it at a real species education page would overstate what it is.
FULL SPECIFICATION
| Colour | Scenic Oak |
|---|---|
| Range | Highland Hybrid Collection |
| Type | Hybrid |
| Core | Rigid limestone composite |
| Dimensions | 1520 × 180 × 6mm |
| Wear layer | 0.5mm |
| Surface | Embossed woodgrain |
| Finish | Lacquer matte |
| Profile | Micro-bevel edge |
| Install | Angle-to-angle locking, floating |
| Water resistance | 100% waterproof |
| Underlay | 1mm IXPE |
| Acoustic rating | 5-star |
| Slip rating | Confirm on enquiry |
| Commercial rating | Confirm on enquiry |
| Box size | Confirm on enquiry |
| Warranty | Confirm on enquiry |
Specifications indicative — confirm exact figures on enquiry. Fields still being confirmed with the manufacturer are marked above.
Full specifications available on request.
ADDITIONAL INFORMATION
| Install method | Floating only, angle-to-angle click profile. No adhesive. Expansion gaps required at every perimeter and around fixed vertical elements. |
|---|---|
| Subfloor preparation | Clean, dry and flat. At 6mm this is a slim board and it telegraphs subfloor imperfection more than a thicker one — level properly before laying. |
| Acclimatisation | Acclimatise on site for 24-48 hours in the room of installation, boxes laid flat. |
| Wet-area suitability | Suitable throughout, including kitchens, bathrooms and laundries. The limestone composite core is 100% waterproof. |
| Underfloor heating | Underfloor heating compatibility is not published for this range — confirm on enquiry before specifying over a heated substrate. |
OTHER COLOURS IN THIS RANGE