Close-up of timber grain in warm honey and dark brown, growth rings running the length of the board

Natural Ash

Natural Ash — Highland Hybrid Collection
Hybrid

Natural Ash

from the Highland Hybrid Collection

Pale blond ash-look decor with a soft pink cast.

ABOUT NATURAL ASH

Natural Ash is a pale blond decor reproducing the Victorian Ash look — soft straw-to-blond with the faint pink undertone characteristic of that timber group, and a fine straight grain with little dramatic figure.

It is the softest-toned board in this range. Where Australian Blackbutt is golden, Natural Ash is cooler and slightly rosier, and the effect in a room is gentle rather than bright. It is a quiet floor that does not assert itself.

That makes it a good match for the era of house it evokes. Victorian Ash and Tasmanian Oak were laid extensively through mid-century Victorian homes, so in a 1950s or 1960s Peninsula property this decor sits naturally with the original timber windows and simple detailing. It also suits a contemporary minimal interior for the same reason — it stays out of the way.

The fine straight grain keeps the floor visually calm across a large area, and the low contrast means it works well in smaller rooms where a busier decor would feel crowded.

As with any pale floor, dark grit shows more than it would on a mid-brown board, though the fine grain pattern helps break it up. Dust is well hidden.

At 6mm it is a practical choice where floor height against existing surfaces is a constraint.

FULL SPECIFICATION

ColourNatural Ash
RangeHighland Hybrid Collection
Type Hybrid
Core Rigid limestone composite
Dimensions 1520 × 180 × 6mm
Wear layer 0.5mm
Surface Embossed woodgrain
Finish Lacquer matte
Profile Micro-bevel edge
Install Angle-to-angle locking, floating
Water resistance 100% waterproof
Underlay 1mm IXPE
Acoustic rating 5-star
Slip rating Confirm on enquiry
Commercial rating Confirm on enquiry
Box size Confirm on enquiry
Warranty Confirm on enquiry

Specifications indicative — confirm exact figures on enquiry. Fields still being confirmed with the manufacturer are marked above.

Full specifications available on request.

ADDITIONAL INFORMATION

Install methodFloating only, angle-to-angle click profile. No adhesive. Expansion gaps required at every perimeter and around fixed vertical elements.
Subfloor preparationClean, dry and flat. At 6mm this is a slim board and it telegraphs subfloor imperfection more than a thicker one — level properly before laying.
AcclimatisationAcclimatise on site for 24-48 hours in the room of installation, boxes laid flat.
Wet-area suitabilitySuitable throughout, including kitchens, bathrooms and laundries. The limestone composite core is 100% waterproof.
Underfloor heatingUnderfloor heating compatibility is not published for this range — confirm on enquiry before specifying over a heated substrate.

THE TIMBER BEHIND IT

Natural Ash is a Victorian Ash -look floor. If you want to know how Victorian Ash behaves underfoot on the Peninsula — how it sands, what coatings suit it, how it handles coastal humidity — read our Victorian Ash species guide.

Natural Ash from the Highland Hybrid Collection — supplied and installed across the Peninsula. Request a quote or a sample.