Close-up of timber grain in warm honey and dark brown, growth rings running the length of the board

Mornington

Mornington — Peninsula Oak Collection
Engineered Timber

Mornington

from the Peninsula Oak Collection

Mid-brown oak with an even, quiet grain.

ABOUT MORNINGTON

Mornington is the middle of the range and the safest choice in it. The tone is a true mid-brown oak — not pulled warm with red, not cooled off toward grey — which is exactly why it sits comfortably against almost any wall colour and joinery finish you already have.

The grain reads quietly. There is figure in the veneer, but the colour is even enough across the board that no single plank jumps out of the floor, and that evenness is what makes it work across a whole house rather than one room. Laid through a hallway, living area and bedrooms, it holds together as a single surface instead of drawing attention to the transitions.

It pairs particularly well with white and off-white walls, where the brown reads warm without tipping orange, and with the pale stone and matte black tapware common in Peninsula kitchen renovations. Against darker joinery it holds its own rather than disappearing.

Practically, mid-tones are the most forgiving floors to live with. Very pale floors show every mark; very dark floors show every speck of dust and every footprint. Mornington sits between the two and is the colour we recommend most often to families with dogs, children, or a front door that opens onto sand.

FULL SPECIFICATION

ColourMornington
RangePeninsula Oak Collection
Type Engineered timber
Core 8-layer multi-ply
Thickness 14mm
Veneer 2mm European Oak
Dimensions 1900 × 190mm
Finish Matte embossed
Profile Micro-bevel edge
Install Drop-lock click — floating or direct stick
Slip rating P3
Acoustic rating 5-star
Box size 6 planks / 2.166m²
Warranty 30yr residential + lifetime structural
Janka Confirm on enquiry
Grade Confirm on enquiry

Specifications indicative — confirm exact figures on enquiry. Fields still being confirmed with the manufacturer are marked above.

Full specifications available on request.

ADDITIONAL INFORMATION

Install methodDrop-lock click profile. Float over an acoustic underlay, or direct stick to the subfloor with a flexible timber adhesive where maximum solidity underfoot is wanted.
Subfloor preparationThe subfloor must be clean, structurally sound and dry, flat to within 3mm over a 2m straightedge. High spots ground back, low spots filled with a suitable levelling compound.
AcclimatisationAcclimatise on site for at least 48 hours before installation. Stack boxes flat in the room where the floor will be laid, with the ends opened so air can move through the packs.
Wet-area suitabilityNot suitable for bathrooms, laundries or any permanently wet area. Fine for kitchens and entries where spills are wiped up promptly.
Underfloor heatingCompatibility with underfloor heating is not published for this range — confirm on enquiry before specifying over a heated slab.

THE TIMBER BEHIND IT

Mornington is a real Engineered Oak floor. If you want to know how Engineered Oak behaves underfoot on the Peninsula — how it sands, what coatings suit it, how it handles coastal humidity — read our Engineered Oak species guide.

Mornington from the Peninsula Oak Collection — supplied and installed across the Peninsula. Request a quote or a sample.