Close-up of timber grain in warm honey and dark brown, growth rings running the length of the board

Tasmanian Oak

Tasmanian Oak — Australian Heritage Hybrid
Hybrid

Tasmanian Oak

from the Australian Heritage Hybrid

Soft pale decor with a pinkish cast.

ABOUT TASMANIAN OAK

Tasmanian Oak is the lightest and softest-toned decor in this range. The real timber is a pale straw-to-blond hardwood with a characteristic faint pink undertone, and the decor keeps that pinkish warmth rather than correcting it to a neutral cream.

That subtle warmth is what distinguishes it from the other pale option here. Blackbutt Natural is golden; Tasmanian Oak is softer and slightly rosier, and in a room with plenty of natural light it reads as gentle rather than bright. It is a quiet, unassuming floor.

It is a strong fit for the era of house it belongs to. Tasmanian Oak was laid extensively through mid-century Victorian homes, so in a 1950s or 1960s Peninsula house this decor sits naturally with the original architecture — the timber windows, the simple skirtings, the compact rooms. It also works well in a modern minimalist interior for the same reason it works in a period one: it does not assert itself.

The grain is fine and straight with little dramatic figure, so the floor stays visually calm across a large area. As with any pale floor, dark grit shows more than it would on a mid-brown board, though the fine grain pattern helps break it up.

FULL SPECIFICATION

ColourTasmanian Oak
RangeAustralian Heritage Hybrid
Type Hybrid
Core SPC (stone plastic composite)
Thickness 7mm total
Wear layer 0.5mm
Dimensions 1830 × 183mm
Finish Embossed
Profile Micro-bevel
Install Unilin Click, floating
Slip rating P3
Acoustic rating 5-star
Base layer Integrated IXPE
Commercial rating AC4 light commercial
Treatment Ceramic antimicrobial coating
Water resistance 100% waterproof
Box size 6 planks / 2.01m²
Warranty Limited lifetime residential / 10yr commercial / lifetime structural

Full specifications available on request.

ADDITIONAL INFORMATION

Install methodFloating only, using the Unilin click profile. No adhesive. Expansion gaps are required at every perimeter and at all fixed vertical elements.
Subfloor preparationClean, dry and flat. The rigid core bridges minor imperfections better than flexible vinyl, but significant undulation still needs levelling before the floor goes down.
AcclimatisationAcclimatise on site for 24-48 hours in the room of installation, boxes laid flat and stacked no more than shoulder height.
Wet-area suitabilitySuitable throughout, including bathrooms and laundries. The SPC core is 100% waterproof and will not swell.
Underfloor heatingUnderfloor heating compatibility is not published for this range — confirm on enquiry before installing over a heated substrate.

THE TIMBER BEHIND IT

Tasmanian Oak is a Tasmanian Oak -look floor. If you want to know how Tasmanian Oak behaves underfoot on the Peninsula — how it sands, what coatings suit it, how it handles coastal humidity — read our Tasmanian Oak species guide.

Tasmanian Oak from the Australian Heritage Hybrid — supplied and installed across the Peninsula. Request a quote or a sample.