Close-up of timber grain in warm honey and dark brown, growth rings running the length of the board

Driftwood Oak

Driftwood Oak — Coastal Oak Collection
Engineered Timber

Driftwood Oak

from the Coastal Oak Collection

Grey-brown weathered tone with visible variation.

ABOUT DRIFTWOOD OAK

Driftwood Oak is the most characterful board in the Coastal Oak Collection. Where Seaside Grey is an even weathered grey, this one carries more variation — grey and brown shifting board to board, some planks noticeably warmer than their neighbours, in the way genuinely weathered timber never darkens uniformly.

That variation is the appeal and it is worth understanding before ordering. Laid across a room the floor has visible movement and life; no two areas look quite the same. If you want a uniform floor this is the wrong board and Peninsula Oak is the right one. If you want a floor that looks like it has been there a while and acquired some history, this is the one in the range that does it.

The wire-brushed grain amplifies the effect. The texture catches light differently across boards of different tone, so the floor changes noticeably as you move through the room and as the light changes through the day.

It suits relaxed coastal and rustic interiors — natural fibre rugs, weathered timber furniture, white or soft grey walls, plenty of texture in the soft furnishings. It works less well in a strictly minimal interior, where its variation reads as noise against clean lines.

Practically the mixed tone is forgiving. Sand, grit and everyday marks all disappear into the variation rather than sitting on top of it, which makes it a sound choice for a holiday house that gets used hard.

FULL SPECIFICATION

ColourDriftwood Oak
RangeCoastal Oak Collection
Type Engineered timber
Core Multi-ply
Thickness 14.5mm
Veneer 3mm European Oak
Dimensions 1900 × 190mm
Finish UV lacquer, 8-10 coats; matte wire-brushed
Profile Bevelled edge
Install Tongue & groove
Board format Nested — short and full length, minimum 600mm
Box size 2.166m²
Warranty 20yr residential wear + lifetime structural
Slip rating Confirm on enquiry
Acoustic rating Confirm on enquiry
Janka Confirm on enquiry
Grade Confirm on enquiry
Planks per box Confirm on enquiry

Specifications indicative — confirm exact figures on enquiry. Fields still being confirmed with the manufacturer are marked above.

Full specifications available on request.

ADDITIONAL INFORMATION

Install methodTongue-and-groove profile — direct stick or float over a high-density acoustic underlay. Boards are nested, so open several boxes and select as you lay to distribute lengths evenly.
Subfloor preparationClean, structurally sound and dry, flat to within 3mm over a 2m straightedge. Grind high spots and fill low spots before laying.
AcclimatisationAcclimatise on site for at least 48 hours, boxes flat with ends opened. Coastal homes can run higher ambient humidity — do not shorten this step.
Wet-area suitabilityNot suitable for bathrooms, laundries or permanently wet areas. Suitable for kitchens and entries with prompt spill management.
Underfloor heatingUnderfloor heating compatibility is not published for this range — confirm on enquiry before specifying over a heated slab.

THE TIMBER BEHIND IT

Driftwood Oak is a real Engineered Oak floor. If you want to know how Engineered Oak behaves underfoot on the Peninsula — how it sands, what coatings suit it, how it handles coastal humidity — read our Engineered Oak species guide.

Driftwood Oak from the Coastal Oak Collection — supplied and installed across the Peninsula. Request a quote or a sample.